Your Location:HOME > Products > dehumidifier > rotary dehumidifier

SAH Series

SAH Series

Specification

SAH series low dew point desiccant rotor dehumidifier

Work principle

SAH series low dew point dehumidifier makes good use of the characteristic of silica gel and molecular sieve wheel that has high dehumidifying efficiency during low temperature and low humidity conditions, adopting rotary wheel scientifically equipped with DX refrigeration system, with special dehumidifying technics flow and duct design, controls the air temperature of each process, obtaining supplying air with normal temperature and super low dew point.

Application

At present, it is widely used in many factories of lithium battery and lithium material, already proofed the dehumidifier can meet the special requirements of the production craft.

Functional Buildup

1. Pre-filter, Fresh air cooling, reflow air section, mixing cooling, silica gel or molecular sieve wheel, cool and reactivation area, posting-cooling, pocket type medium filter, homogenization, process blower, PLC electric control system.The functions can be adjusted according to technics flow.

2. The refrigeration system can be provided along with the dehumidifier or provided by the user.

Service

We can carry on turnkey dry system project, including the whole project of clean room, buffer area, partition, safe door and window, lighting, socket, floor on grade, duct and so on special design, manufacture, installation and adjustment.

 

SAH Main Parameters
Model SAH-1000 SAH-1500 SAH-2000 SAH-2500 SAH-3000 SAH-4000 SAH-5000 SAH-6000 SAH-8000
Process Airflow m3/h 1000 1500 2000 2500 3000 4000 5000 6000 8000
Process Fan Power kw 1.1 2.2 2.2 3.0 3.0 4.0 5.5 7.5 11.0
Reactivation Fan Power kw 0.25 0.75 0.75 0.75 1.1 1.1 1.5 1.5 2.2
Driving Motor Power kw 0.1 0.2
Reactivation Heating  Electric kw/h 1.5 3.0 3.6 6.0 7.2 9.0 10.8 12.0 18
Steam Kg/h 6 8 10 12 15 18 22 24 36
Low Humidity Reactivation Electric kw/h 6 7.2 9 10.8 14.4 18 21.8 24 36
Steam Kg/h 12 15 18 22 30 36 44 48 72
Installed Power Electric Mode kw 9.0 13.3 15.7 20.7 25.9 31.3 39.8 45.2 67.4
Steam Mode kw 1.5 3.1 3.1 3.9 4.3 5.3 7.2 9.2 13.4
Cooling Load kw 20 24 30 36 45 60 75 90 150
Overall Dimension L mm 3650 4200 4500 6900 6900 7200 7200 7500 7500
W mm 1000 1215 1250 1315 1410 1505 1600 1745 1935
H mm 1250 1350 1420 1445 1540 1635 1730 1825 1875
Weight kg 800 1000 1100 1200 1500 1800 2000 2200 2500
Surplus Pressure of the Unit Pa ≤500
Installed Power mPa 0.4
Supply Air Parameters Temperature Temp.T = 15-28 ℃,dew point temperature Dew Point TL≤-60℃
Power Supply 3P-380V-50Hz three-phase four-wire system (can be customized Can be customized)
Note:
1. Above table shows the parameters of a part of model for your reference,the final parameters is according to  your design based on the user’s conditions.
2. All the parameters base on: The temperature of process airflow and regeneration airflow 35℃,the relative humidity 65%, regeneration temperature 130-150℃
3. The technology and design can be changed without notification, non-standard requirements or particular specification can be customized.
4.If picture and parameters are different with real machine, please refer to our real machine.
  • Example:David
  • Mr. Ms.
    Choose gender
  • Example:name@example.com
  • Example:86-571-89962021
  • Example:HANGZHOU ISUAO TEC...
  • Example:China
  • Example:Intime Center, No. 1600...

Isuao technolocy Responsive Theme

© 2016 - Zhejiang Isuao Envirotech Co., Ltd. Web support by :HWAQ